Call Us: 01162 677053
visit blog
pond construction
Hall of Fame
Koi Auctions
Gift Vouchers

ThermoTec Heat Pumps

Code: ThermoTec-Heat-Pumps
  • From £75.00
  • (FREE UK Delivery)

Pond Sizing Guide:

Model
Max Pond Volume
Thermotec Inverter Horizontal 9kw 4500 gallons
Thermotec Inverter Horizontal 12kw 6000 gallons
Thermotec Inverter Horizontal 17kw
7500 gallons
Thermotec Inverter Horizontal 19.5kw
9600 gallons
Thermotec Inverter Horizontal 24kw
11,600 gallons
Thermotec Inverter Vertical 29kw
13,800 gallons
Thermotec Inverter Vertical 34kw
19,900 gallons


COP and Performance:

By using the latest inverter technology, the Thermotec Inverter canout perform traditional on/off type heat pumps as well as many other inverter driven models.

Even as the outside air temperature falls, the Thermotec Inverter will still perform well, delivering heat to your pool.

The Thermotec Inverter heat pumps can work well with outside air temperatures as low as -15c

The COP (Coefficient of Performance) is the ratio of the amount of heat (in kw) that the heat pump delivers to your pool compared to the electricity that the heat pump uses (in kw)

By using the latest inverter technology, the Thermotec Inverter has COPs up to 13.6. This means that in these conditions, 1kw of electricity consumed by the heat pump will output 13.6kw of heat to your pool

Themotec Inverter Heat Pumps COP Ratings

Extremely Quite Operation:

The Thermotec Inverter range work very silently thanks to a unique internal ventilation system and the inverter technology.

Both the fan and compressor automatically adjust their speed to match the pool heat demand, therefore once the pool is up to temperature, the unit can operate with reduced power consumption and noise.

thermotec-inverter-noise-chart.JPG
Colour Touch Screen Controls:

The Thermotec Inverter have a unique 5" colour backlit touch screen control/display panel

This provides easy to use controls

Themotec Inverter Heat Pumps Colour display

The display will show:

– The current pool water temperature
– The mode (eg heating or cooling)
– If the timer function has been set
– If the fan is operating
– The current time and date
– The outside ambient temperature
– If there is a fault, a fault code is displayed to explain the problem

In addition, the display can show:

– A graph of the temperature of the pool over time so that you can see how the pool temperature is being maintained by the Thermotec Inverter heat pump
– A graph of the power consumed by the heat pump over time

The colour display is backlit making it easy to read in low light conditions and also in bright sunlight

Wifi Control:

The optional Wi-Fi module allows the Thermotec Inverter to be monitored and controlled from a smartphone or any internet web browser.

The Thermotec Inverter App is available for both Android and iPhone

The Wi-Fi module simply connects to the heat pump via the supplied cable

The module is then joined to your wi-fi network to allow it to communicate with the internet

The wifi module also allows HeatPumps4Pools to provide remote monitoring and support of your heat pump with the ability to change any settings if required. This greatly enhances the speed and efficiency of our technical support.

The Thermotec Inverter app can then be installed into your smart phone to give full remote control and monitoring of your pool heat pump.

Using the app you can:

– Turn the heat pump on and off
– See the current pool water temperature
– Alter the desired pool set temperature 
– Set the timer 
– View the pool temperature history graph
– Change the mode of the heat pump from heating, cooling and auto modes
– Put the heat pump in and out of silence mode (eg for nightime use)
– Show the weather temperatures and information
– Display any error codes and messages

Note: A a wifi signal is required at the location of the heat pump in order for the wifi module to be able to connect to your wifi. 

Please test the strength of the wifi signal e.g with a laptop or your smart phone before purchasing the wifi module. 

If you do not have a wifi signal at the heat pump's location, then you can either:

  1. Use a wifi signal extender to boost the signal in the area of the heat pump
  2. Use power lan adaptors plugged into mains sockets in the house and the pool shed. You can then connect a wifi extended to the powerlan adaptor in your pool shed. 


Specifications:

Themotec Inverter Heat Pumps Specifications Winter Cover and Mounting Feet Included:

The Thermotec Inverter horizontal range of heat pumps come with:-

– 2 x Water connection unions (with 50mm glue socket outlets - 1.5" adaptor bushes available as an option)
– 1 x Basic Winter cover (heavy duty winter cover available as an option - see below)
– 4 x Rubber mounting feet (heavy duty mounting blocks available as an option - see below)

Optional Extras:

– Wifi Control
– Heavy Duty Mounting Feet

These heat pumps come with rubber  mounting feet (see photo above).
Alternatively you can purchase these heavy duty Mounting Feet.
These raise the unit off the ground by approximately 100mm, and also help to reduce vibration.

– Bypass Kit:




Heavy Duty Winter Cover:



The unit comes with a lightweight winter cover, however we offer a heavy duty cover which will give you added and extended protection against the winter weather

Warranty:

The Thermotec Inverter heat pumps come with a 3-year warranty on all components:-

  • UK - First year - parts and labour warranty, Years 2 and 3 - parts only warranty, or return to us in the UK (customer pays transport cost)
  • Europe and outside the UK - 3-Year parts only warranty or return to us in the UK (customer pays transport cost

We recommend that you retain the pallet and packaging that the heat pump was delivered with in case you need to return the unit to us for repairs under the warranty. 

Please Note: The warranty will not apply where the heat pump has been installed incorrectly, or has been damaged by freezing. 

Please Note: These are not eligible for loyalty points so please call to order.

awarded when you purchase this product
Item in Stock   |   Usually dispatched within 24 hours (Excluding Koi)
Order within for delivery on Wednesday 6th July
Loading...
100% SECURE SHOPPING Powered by PayPal
NO HASSLE RETURNS Click for contact information ›

New prices as of 21/10/21


ThermoTec Heat Pumps

The most economical way to heat a koi pond. We only supply the best air source heat pumps available.

Please Note: Prior to ordering we will double check stock with our supplier and get in touch with yourself to arrange delivery/collection. This is why we show "no stock" as we'd rather double check stock with our supplier. Please leave your phone number on the order.

Please Note: The Thermotec Inverter range of pool heat pumps are not eligible for loyalty points so please call to order. Unfortunately our system does not allow to exclude products from the scheme when purchasing on the website.

Description:

The Thermotec Inverter range of pool heat pumps really do offer the best in terms of efficiency, performance, reliability and low noise operation.

The Thermotec Inverter range are fully inverter driven. This means that they automatically adjust the speed of the fan and compressor to precisely match the heat demand from the pool.

The ability to adjust the output of the heat pump allows the Thermotec Inverter to deliver greatly reduced running costs with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is delivered to the pool. This delivers reduced running costs compared with other heat pumps on the market

In addition the inverter technology has a reduced electrical startup requirement, making them ideal for properties with a sensitive or limited electrical supply.

Features:

– Fully inverter driven with variable speed fan and compressor to deliver the lowest running costs with maximum heat output
– High efficiency with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is returned to the pool.
– The desired water temperature can be adjusted in steps of 0.1  ∞C.
– Equipped with an easy to use 5-inch colour touch screen display / control panel.
– Remote control and monitor your heat pump via an app on your smartphone
– Remote support from HeatPumps4Pools via the wifi module
– Top quality Mitsubishi variable speed inverter compressor
– Brushless variable speed DC fan motor - very efficient with extremely quiet operation
– Control panel is lockable to prevent tampering with the pool set temperature (useful for rented properties)
– Display shows temperature & power consumption curves to monitor the performance of the heat pump
– Six different models:9kw, 12kw, 17kw, 19.5kw, 24.2kw, 28 kw and 34kw
– All models single phase power (ie 220v to 240v)
– Soft start with reduced electrical startup requirements for properties with sensitive or limited power supplies
– Low noise, variable speed fan.
– Corrosion resistant case
– Microprocessor controlled
– Automatic hot gas defrosting.
– Suitable for use on koi ponds
– Titanium heat exchanger - resistant to corrosion from chlorine or salt pools.
– Operates in air temperatures as low as -15  ∞C.
– Capable of heating and cooling, all year round.
– Optional wifi module - control the heat pump from your smartphone or any web browser
– 3-Year Warranty

Pond Sizing Guide:

Model
Max Pond Volume
Thermotec Inverter Horizontal 9kw 4500 gallons
Thermotec Inverter Horizontal 12kw 6000 gallons
Thermotec Inverter Horizontal 17kw
7500 gallons
Thermotec Inverter Horizontal 19.5kw
9600 gallons
Thermotec Inverter Horizontal 24kw
11,600 gallons
Thermotec Inverter Vertical 29kw
13,800 gallons
Thermotec Inverter Vertical 34kw
19,900 gallons


COP and Performance:

By using the latest inverter technology, the Thermotec Inverter canout perform traditional on/off type heat pumps as well as many other inverter driven models.

Even as the outside air temperature falls, the Thermotec Inverter will still perform well, delivering heat to your pool.

The Thermotec Inverter heat pumps can work well with outside air temperatures as low as -15c

The COP (Coefficient of Performance) is the ratio of the amount of heat (in kw) that the heat pump delivers to your pool compared to the electricity that the heat pump uses (in kw)

By using the latest inverter technology, the Thermotec Inverter has COPs up to 13.6. This means that in these conditions, 1kw of electricity consumed by the heat pump will output 13.6kw of heat to your pool

Themotec Inverter Heat Pumps COP Ratings

Extremely Quite Operation:

The Thermotec Inverter range work very silently thanks to a unique internal ventilation system and the inverter technology.

Both the fan and compressor automatically adjust their speed to match the pool heat demand, therefore once the pool is up to temperature, the unit can operate with reduced power consumption and noise.

thermotec-inverter-noise-chart.JPG
Colour Touch Screen Controls:

The Thermotec Inverter have a unique 5" colour backlit touch screen control/display panel

This provides easy to use controls

Themotec Inverter Heat Pumps Colour display

The display will show:

– The current pool water temperature
– The mode (eg heating or cooling)
– If the timer function has been set
– If the fan is operating
– The current time and date
– The outside ambient temperature
– If there is a fault, a fault code is displayed to explain the problem

In addition, the display can show:

– A graph of the temperature of the pool over time so that you can see how the pool temperature is being maintained by the Thermotec Inverter heat pump
– A graph of the power consumed by the heat pump over time

The colour display is backlit making it easy to read in low light conditions and also in bright sunlight

Wifi Control:

The optional Wi-Fi module allows the Thermotec Inverter to be monitored and controlled from a smartphone or any internet web browser.

The Thermotec Inverter App is available for both Android and iPhone

The Wi-Fi module simply connects to the heat pump via the supplied cable

The module is then joined to your wi-fi network to allow it to communicate with the internet

The wifi module also allows HeatPumps4Pools to provide remote monitoring and support of your heat pump with the ability to change any settings if required. This greatly enhances the speed and efficiency of our technical support.

The Thermotec Inverter app can then be installed into your smart phone to give full remote control and monitoring of your pool heat pump.

Using the app you can:

– Turn the heat pump on and off
– See the current pool water temperature
– Alter the desired pool set temperature 
– Set the timer 
– View the pool temperature history graph
– Change the mode of the heat pump from heating, cooling and auto modes
– Put the heat pump in and out of silence mode (eg for nightime use)
– Show the weather temperatures and information
– Display any error codes and messages

Note: A a wifi signal is required at the location of the heat pump in order for the wifi module to be able to connect to your wifi. 

Please test the strength of the wifi signal e.g with a laptop or your smart phone before purchasing the wifi module. 

If you do not have a wifi signal at the heat pump's location, then you can either:

  1. Use a wifi signal extender to boost the signal in the area of the heat pump
  2. Use power lan adaptors plugged into mains sockets in the house and the pool shed. You can then connect a wifi extended to the powerlan adaptor in your pool shed. 


Specifications:

Themotec Inverter Heat Pumps Specifications Winter Cover and Mounting Feet Included:

The Thermotec Inverter horizontal range of heat pumps come with:-

– 2 x Water connection unions (with 50mm glue socket outlets - 1.5" adaptor bushes available as an option)
– 1 x Basic Winter cover (heavy duty winter cover available as an option - see below)
– 4 x Rubber mounting feet (heavy duty mounting blocks available as an option - see below)

Optional Extras:

– Wifi Control
– Heavy Duty Mounting Feet

These heat pumps come with rubber  mounting feet (see photo above).
Alternatively you can purchase these heavy duty Mounting Feet.
These raise the unit off the ground by approximately 100mm, and also help to reduce vibration.

– Bypass Kit:




Heavy Duty Winter Cover:



The unit comes with a lightweight winter cover, however we offer a heavy duty cover which will give you added and extended protection against the winter weather

Warranty:

The Thermotec Inverter heat pumps come with a 3-year warranty on all components:-

  • UK - First year - parts and labour warranty, Years 2 and 3 - parts only warranty, or return to us in the UK (customer pays transport cost)
  • Europe and outside the UK - 3-Year parts only warranty or return to us in the UK (customer pays transport cost

We recommend that you retain the pallet and packaging that the heat pump was delivered with in case you need to return the unit to us for repairs under the warranty. 

Please Note: The warranty will not apply where the heat pump has been installed incorrectly, or has been damaged by freezing. 

Please Note: These are not eligible for loyalty points so please call to order.

DELIVERY INFORMATION: (Except Koi)
Over 95% of orders are dispatched the same working day when received before 12pm,
we use a next working day service with a signature required when delivered.
If you will be at work, perhaps a different delivery destination may be better to ensure a timely delivery.
Small items that are posted will not require a signature.

Free delivery on orders over £50
Standard delivery charge - £5.95
Small items that can be posted - £2.95

 

To read more click here: 

Be the first to review Heat Pumps. Write a review
Contact us with any questions you have about this product
Top